Altelix 12x9x5 Vented PC+ABS Indoor / Outdoor RF Transparent WiFi Access Point Enclosure with PVC Non-Metallic Equipment Mounting Plate
- Usually Ships in 1 to 2 Business Days
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
Vented Weatherproof Polycarbonate + ABS Construction For Extreme Durability
The Altelix NP120905VM Plastic Utility Enclosure with Non-Metallic Equipment Mounting Plate features two 2¼" inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries.
Construction and Features
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.
Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
RF Transparent Design
The NP120905VM is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere the radio's operation. In addition, mounting radios to PVC equipment mounting plate can be done simply by using self-tapping screws. The size of this enclosure will fit a wide range of popular wireless points on the market.
Complete with Cable Grommets and Wire Management Straps
This enclosure includes 4 weatherproof cable grommets. Simply punch out the seal and run your cables. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, plastic wire management loops, door locking key and more.
Pole Mount Available
A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it be mounted to poles and fence posts up to 9.5 inches in diameter.
|Material||Polycarbonate + ABS|
|Outer Dimensions||13.1 x 10.2 x 5.9 Inches
(334 x 259 x 151 mm)
|Inner Dimensions*||9.4 x 7.5 x 3.5 Inches
(239 x 190 x 89 mm)
|Mounting Plate Material||0.25 in. (6.4 mm) PVC Foam|
|Weight||3.0 lbs. (1.4 kg)|
|Ratings||Meets or Exceeds NEMA 3R, 3RX and IP24|
|Flame Rating||Meets UL94-V0|
|*Interior dimensions represent space available for equipment. See drawing for additional details.|
NEMA Ratings and IP Equivalency Chart