Altelix 14x11x5 Vented Polycarbonate + ABS Indoor Enclosure with Cooling Fan, 120 VAC Outlets & Power Cord
- Contact Us for Availability
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
The Altelix NP141105VA1C-IN Vented Fan Cooled Polycarbonate + ABS Indoor Enclosure with 120VAC Power and Aluminum Equipment Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure features a fully gasketed door to protect from dust. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Cooling Fan Ventilation
These enclosures are designed primarily for indoor use such as in warehouses, office complexes, indoor parking garages and shopping centers. They feature dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Dual fans are also available by request.
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum equipment mounting plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. The enclosure can also be hard wired by an electrician or qualified installer. An external ground lug is provided. A cable grommet on the enclosure allows cables to be connected to internal devices. Knock-outs are also provided on the enclosure for additional wiring. Extra cable grommets are included with the accessory kit.
Aluminum Equipment Mounting Plate
The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0002) is also available for installation on poles up to 8 inches in diameter.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||PC+ABS Polycarbonate / ABS Blend|
|Max Load||10A @ 120VAC|
|Cooling Fan Turn-On Temperature||100°F (38°C)|
|Cooling Fan Turn-Off Temperature||79°F (26°C)|
(Height x Width x Depth)
|13.4 x 11.5 x 5.4 Inches
(340 x 293 x 137 mm)
(Height x Width x Depth)
|9.5 x 8.0 x 3.2 Inches
(241 x 203 x 81 mm)
|Mounting Plate Material||0.08 in (2.0 mm) Aluminum|
|Mounting Plate Dimensions||11.7 x 9.0 in. (298 x 230 mm)|
|Weight||5.4 lbs. (2.4 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 0.78 in. (20 mm)
(4) 1.30 in. (33 mm)
|*Interior dimensions represent maximum space available for equipment.|
NEMA Ratings and IP Equivalency Chart