Altelix 15x10x5 PC+ABS NEMA 4X Indoor / Outdoor RF Transparent Enclosure with PVC Non-Metallic Equipment Mounting Plate, 120 VAC Outlets & Power Cord
- Contact Us for Availability
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
The Altelix NP151005MA1C NEMA 4X enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The non-metallic equipment mounting plate features a pre-wired 120VAC power outlet for your equipment. Cable glands on the enclosure allows cables to be connected to internal devices.
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can be removed and the power receptacle can be hard-wired by a qualified installer.
Construction and Features
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. It meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66.
RF Transparent Design
The NP151005MA1C is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere the radio's operation. In addition, mounting radios to the PVC equipment mounting plate can be done simply by using self-tapping screws. The size of this enclosure will fit a wide range of popular wireless points on the market.
Complete with Cable Glands and Wire Management Straps
This enclosure includes 3 weatherproof cable glands. Simply punch out the seal, run your cable, and hand tighten for a water-tight seal. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
|Material||Polycarbonate + ABS|
|Max Load||10A @ 120VAC|
(Height x Width x Depth)
|15.8 x 11.4 x 5.0 Inches
(401 x 290 x 126 mm)
(Height x Width x Depth)
|11.8 x 8.0 x 3.6 Inches
(298 x 203 x 92 mm)
|Mounting Plate Material||0.25 in. (6.4 mm) PVC Foam|
|Weight||3.95 lbs. (1.8 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Ratings||Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66|
|Flame Rating||Meets UL94-V0|
|*Interior dimensions represent maximum space available for equipment. See drawing for additional details.|
NEMA Ratings and IP Equivalency Chart