Altelix 15x10x5 Vented Polycarbonate + ABS Indoor RF Transparent NEMA Enclosure with PVC Non-Metallic Equipment Mounting Plate
- SKU:
- NP151005VM-IN
- Availability:
- Usually Ships in 3 to 5 Business Days
For customization and volume pricing inquiries please Click Here to email us at sales@altelix.com
Description
Features
|
Applications
|
Vented Indoor Polycarbonate + ABS Construction For Extreme Durability
The Altelix NP151005VM-IN featues two 3" inch air vents with removable filters. It is ideal for protecting small devices from theft and tampering, while allowing ventilation for installed equipment and batteries.
Construction and Features
These enclosures are molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. It meets or exceeds NEMA 3R, 3RX and IP24.
Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
RF Transparent Design
The NP151005VM-IN is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere the radio's operation. In addition, mounting radios to PVC equipment mounting plate can be done simply by using self-tapping screws. The size of this enclosure will fit a wide range of popular wireless points on the market.
Complete with Cable Glands and Wire Management Straps
This enclosure includes 4 weatherproof cable glands. Simply punch out the seal, run your cable, and hand tighten for a water-tight seal. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
Technical Specifications
Material | Polycarbonate + ABS |
Color | Gray |
Outer Dimensions (Height x Width x Depth) |
15.8 x 11.4 x 5.0 Inches (401 x 290 x 126 mm) |
Inner Dimensions* (Height x Width x Depth) |
11.8 x 8.0 x 3.6 Inches (298 x 203 x 92 mm) |
Mounting Plate Material | 0.25 in. (6.4 mm) PVC Foam |
Weight | 4.1 lbs. (1.8 kg) |
Ratings | Meets or Exceeds NEMA 3R, 3RX and IP24 |
Flame Rating | Meets UL94-V0 |
*Interior dimensions represent space available for equipment. |
![]() |
NEMA Ratings and IP Equivalency Chart |
Downloads
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
www.p65warnings.ca.gov