Altelix 17x14x6 Green Polycarbonate + ABS Weatherproof NEMA Enclosure with Equipment Mounting Plate, 120 VAC Outlets & Power Cord
- Same Day Shipping
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
The Altelix NP171406GA1C Green NEMA Weatherproof Enclosure with 120VAC Power and Aluminum Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. This enclosure NEMA Type 3, 3X, IP55 rated and features a fully gasketed door to protect from dust and water ingress. The front and sides of this enclosure are RF transparent, making it ideal for wireless equipment.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of Green UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
The fully gasketed door features reinforced hinges, dual latches and a removable tamper-proof locking screw with key to secure the enclosure if desired. There is also a provision for padlock use. Internal and external electrical ground points are also provided.
The green color of the NP171406GA1C makes it ideal for deploying surveillance and security equipment as well as irrigation controllers, WiFi equipment and building automation control equipment which typically requires low visibility. It can easily blend in with indoor and outdoor gardens and landscapes.
This configuration consists of the Green PC+ABS NEMA enclosure with hinged lid and a 2.0mm thick aluminum plate with two 120VAC power outlets. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. The enclosure can also be hard wired by an electrician or qualified installer. An external ground lug is provided. Two cable grommets on the enclosure allows cables to be connected to internal devices. Knock-outs are provided on the enclosure for additional wiring. Extra cable grommets are included with the accessory kit.
Aluminum Equipment Mounting Plate
The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0001) is also available for installation on poles up to 8 inches in diameter.
The included accessory kit contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting) and a ground cable.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||PC+ABS Polycarbonate / ABS Blend|
|Color||Green (RAL 6001)|
|Max Load||10A @ 120VAC|
|Outer Dimensions||16.5 x 12.5 x 5.3 Inches
(420 x 320 x 133 mm)
|Inner Dimensions||15.7 x 11.8 x 4.8 Inches
(399 x 300 x 120 mm)
|Mounting Plate Material||0.10 in (2.5 mm) Aluminum|
|Mounting Plate Dimensions||14.9 x 11.2 in. (378 x 284 mm)|
|Weight||5.8 lbs. (2.6 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Ratings||NEMA Type 3, 3X / IP55|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 1.02 in. (26 mm)
(4) 1.30 in. (33 mm)
NEMA Ratings and IP Equivalency Chart