Altelix 9x8x3 Vented PC+ABS RF Transparent Outdoor WiFi Enclosure with No-Drill PVC Equipment Mounting Plate

Vented Weatherproof Polycarbonate + ABS Construction For Extreme Durability

The Altelix NP090803VM Plastic Utility Enclosure with Non-Metallic Equipment Mounting Plate features two 2¼" inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries.

Construction and Features
These enclosures are molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. It meets or exceeds NEMA 3R, 3RX and IP24. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

No-Drill Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. Due to the "No-Drill" design of this PVC plate, mounting radios and other equipment can be done simply by using self-tapping screws.

RF Transparent Design
The NP090803VM is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. 

Complete with Cable Glands and Wire Management Straps
This enclosure includes 4 weatherproof cable glands. Simply punch out the seal, run your cable, and hand tighten for a water-tight seal. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Pole Mount Available
A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it be mounted to poles and fence posts up to 9.5 inches in diameter.

Technical Specifications

Material	Polycarbonate + ABS
Available Colors	Gray, OD Green, Light Ivory
Outer Dimensions	9.3 x 8.6 x 4.3 Inches (236 x 219 x 109 mm)
Inner Dimensions*	7.0 x 5.5 x 2.0 Inches (178 x 140 x 51 mm)
Mounting Plate Material	0.25 in. (6.4 mm) PVC
Weight	1.7 lbs. (0.8 kg)
Ratings	Meets or Exceeds NEMA 3R, 3RX and IP24
Flame Rating	Meets UL94-V0
Included Cable Glands	(4) PG13.5

*Interior dimensions represent space available for equipment. See drawing for additional details.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.

  Same Day Shipping - Click Here for details.