Description
Features
|
Applications
|
Internal 2U 19" Vertical Equipment Rack
The NF162012VA1C-RV2U features a standard 19" 2U vertical equipment rack. It is designed to accommodate a wide range of equipment such as network switches, rack mount audio/video equipment and most other rack mountable equipment. The rack frame mounts to a 2.0mm thick aluminum plate which can also be drilled and modified by the installer to unique site requirements. Two mounting positions for the rack are provided to accommodate a wide range of equipment sizes.
Installation Note: The max. depth of the 2U rack is 9.6" (244mm). Before ordering please check the dimensions of the equipment to be installed to ensure proper fit.
Plug and Play Power for Rapid Deployment
The Altelix NF162012VA1C-RV2U enclosure features two 4 inch air vents covered by rain shields with cleanable screens which helps expel heat from the installed equipment. The NF162012VA1C-RV2U is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. Two pre-wired 120VAC power outlets inside the enclosure provide power to your equipment.
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can be easily removed and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.
Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment. It can be easily drilled and modified by the installer as needed. These enclosures feature improved stainless steel hinges with high quality 316 steel hinge pins for lasting durability in even the harshest of coastal conditions. The gasketed door includes stainless steel quick release latches with padlock hasps.
Cable Glands
The enclosure features our unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Mounting
Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available. Click Here to view all available mounts for this enclosure.
Customization
We offer custom enclosures for WiFi equipment, DIN Mount Industrial Controls, Telephone Call Boxes, IP Phones, Security & Safety, Building Automation and More. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans, heaters. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
Technical Specifications
Material | Fiberglass Reinforced Polyester |
Color | Gray |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Outer Dimensions | 17.9 x 21.8 x 14.3 Inches (454 x 553 x 363 mm) |
Inner Dimensions | 14.7 x 18.7 x 11.0 Inches (374 x 475 x 279 mm) |
Rack Frame | 19" Width 2U Vertical Mount |
Rack Frame Weight Capacity | 66 lbs. (30kg) |
Mounting Plate Material | 0.08 in (2.0 mm) Aluminum |
Mounting Plate Dimensions | 18.7 x 14.8 in. (475 x 378 mm) |
Weight | 23.1 lbs. (10.4 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | NEMA Type 3R, 3RX / IP24 |
Flame Rating | UL94-5V |
![]() |
NEMA Ratings and IP Equivalency Chart |
Downloads
Need a pole mount kit? Click on ADD TO CART below to see all the available accessories for this enclosure.