Altelix 17x14x6 Polycarbonate + ABS Vented Indoor / Outdoor RF Transparent Enclosure with PVC Non-Metallic Equipment Mounting Plate, 120 VAC Outlets, Power Cord & Cooling Fan with Digital Temperature Controller
- Usually Ships in 1 to 2 Business Days
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
The Altelix NP171406VMFA1C-DF NEMA enclosure is simple to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The non-metallic equipment mounting plate features two pre-wired 120VAC power outlets for your equipment.
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can removed and the power receptacle can be hard-wired by a qualified installer.
Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for a padlock. Knock-out holes are provided on the top and bottom.
Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets that can be installed in the knock-out holes for a weather resistant seal. The included accessory kit contains wall anchors, zip ties, wire management loops, ground wire, door locking key and more.
Cooling Fan with Programmable Digital Temperature Controller
This enclosure features two 3" vents and a cooling fan which helps maintain lower internal temperatures. The operation of the cooling fan can be controlled by the programmable digital temperature controller accessible inside the enclosure. The fan can be programmed to turn on and off within a temperature range of -58F° to 230F° (-50C° to 110C°). The controller features a color digital readout and can be programmed for Fahrenheit or Celsius. Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving the power outlets available for installed equipment.
RF Transparent Design
The NP171406VMFA1C-DF is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere the radio's operation. In addition, mounting radios to PVC equipment mounting plate can be done simply by using self-tapping screws. The size of this enclosure will fit a wide range of popular wireless points on the market.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit (NMK-0001) is also available for installation on poles up to 8 inches in diameter.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||PC+ABS Polycarbonate / ABS Blend|
|Max Load||10A @ 120VAC|
|Digital Controller Temperature Range||-58°F (-50°C) to 230°F (100°C)|
|Cooling Fan Turn-On Temperature||100°F (38°C)|
|Cooling Fan Turn-Off Temperature||79°F (26°C)|
|Mounting Plate Material||0.25 In. (6.4 mm) PVC Foam|
|Mounting Plate Dimensions||14.9 x 11.2 in. (378 x 285 mm)|
|Weight||7.1 lbs. (3.2 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 1.02 in. (26 mm)
(4) 1.30 in. (33 mm)
|*Interior dimensions represent maximum space available for equipment.|
NEMA Ratings and IP Equivalency Chart