Altelix Aimable Weatherproof Starlink® Mini NEMA 4X Enclosure with 120VAC Outlets and Optional Heater

The Altelix Starlink® Mini NEMA 4X Aimable Enclosure is designed to provide the ultimate protection for the Starlink® Mini. This rugged weatherproof enclosure can withstand the harshest environments and provides a way to securely deploy the Starlink® Mini. 

Aimable Enclosure for Better Satellite Reception
This enclosure features a heavy duty cast aluminum tilt-n-swivel mounting bracket attached to the rear of the enclosure. This bracket is designed to articulate in both vertical and horizontal planes which allows for precise adjustment and aiming of the enclosure to achieve the best satellite reception. This tilt-n-swivel bracket is designed for both wall and pole/mast mounting. It can be mounted to pole and masts ranging from 1-3 inches in diameter. Using the optional adjustable stainless steel bands available from Altelix, it can be mounted to poles up to 13 inches in diameter.

Starlink® Mini Mounting System
This enclosure features a RF transparent mounting system located in the lid of the enclosure designed specifically for the Starlink® Mini. Angled up 30 degrees, this mounting system places the Starlink® Mini in the optimal position for the best satellite reception and wireless coverage. Easy to install, simply slide the Starlink® Mini into the mount and lock into place. For installations subject to vibrations such as in vehicles, a hook-n-loop strap is provided. A pre-installed cable gland is provided on the enclosure for the Starlink® Mini's Ethernet cable.

Plug and Play Setup
The NP17MA1C-STKM-AIM enclosure provides easy plug-n-play installation. Once the Starlink® Mini is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running. This enclosure can be transitioned to hard-wired later if needed. The power cord can be removed and the power receptacle hard-wired by a qualified installer.

50W Thermostat Controlled Heater
For all weather operation the NP17MHA1C-STKM-AIM is available with a 50W thermostat controlled heater. This heater generates a high air-current of warm air due to the design which supports natural convection. The internal design of this heater helps reduce the surface temperatures on the accessible sides of the housing. The heater turns on when the internal temperature reaches 41°F (5°C) and turns off when it rises to 59°F (15°C). The heater is mounted in the base of the enclosure and is wired internally leaving the power outlets available for the Starlink® Mini.

Polycarbonate + ABS Protection Built to Last
Built to last, this enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements. This enclosure meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66.

Secure Your Equipment
To better secure the Starlink® Mini this enclosure features dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.

RF Transparent Design
The non-metallic design of the enclosure and mounting system is RF transparent and will not interfere with the wireless signal range or coverage pattern.

PoE Powered Model Available
This enclosure is also available in a PoE version, NP17ME3-STKM-AIM. Included with this enclosure are (2) PoE splitters which allow the Starlink® Mini to receive its power and data from a single Ethernet cable. This eliminates the need for an AC outlet at the enclosure location. The first splitter which is installed near a power source is connected to the Starlink® Mini's power supply as well as a router or PC. From this splitter an Ethernet cable up 825 feet (max length at 1000Mbps) can be ran to the enclosure and connected to the second splitter. This second splitter is then connected to the Starlink® Mini's power jack and Ethernet port. Click Here for more information.

Customization
We offer custom enclosures for WiFi equipment, DIN Mount Industrial Controls, Telephone Call Boxes, IP Phones, Security & Safety, Building Automation and More. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans, heaters. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.

Starlink® is a trademark or registered trademark of Space Exploration Technologies Corp.

Technical Specifications

Enclosure Material	PC+ABS Polycarbonate / ABS Blend
Color	Gray
Voltage	120VAC
Max. Load	10A @ 120VAC
Optional Heater Turn-On Temperature	41°F (5°C) ±9°F
Optional Heater Turn-Off Temperature	59°F (15°C) ±9°F
Optional Heater Power	50 Watts
Outer Dimensions (Height x Width x Depth)	17.1 x 13.6 x 9.3 Inches (435 x 347 x 234 mm)
Inner Dimensions (Height x Width x Depth)	14 x 9 x 8.2 Inches (355 x 228 x 208 mm)
Weight with Tilt Bracket	10.4 lbs. (4.7 kg)
Mounting Bracket Material	Die-Cast Aluminum
Pole Mounting Diameter Size	1 to 3 Inches (25.4 to 76.2 mm)
Power Cord Length	5 Feet (1.5m)
Ratings	Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66
Flame Rating	Meets UL94-V0
Industry Certifications	CE
Knockout Sizes (Diameter)	(4) 0.62 in. (16 mm) (4) 1.02 in. (26 mm) (1) 1.30 in. (33 mm)
Compatible Starlink® Models	Starlink® Mini - Model #UTA-231

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.

  Same Day Shipping - Click Here for details.