Altelix Ceiling Mount Enclosure - 14x12x6 PoE Powered Fiberglass FRP with Cooling Fans

PoE Powered Fan Cooled Ceiling Mount NEMA Enclosure

The Altelix NF141206CVMFE1 Ceiling Mount PoE Enclosure is ideal for protecting Power-Over-Ethernet (PoE) enabled equipment from harsh environments and tampering. Using a single Ethernet cable to provide power and data, this enclosure can be installed in remote locations with no power outlets available.

Designed for Ceiling Mount Applications
The NF141206CVMFE1 is intended for installation on ceilings in settings such as industrial facilities, commercial buildings, or institutional environments. With the included stainless steel mounting feet, it can be attached to a wide range of ceiling structures. Optional pole mount kits are also available to mount the enclosure to overhead pipes or truss systems.

Integral Gigabit PoE/PoE+ Repeater / Power Splitter
Featured in this enclosure is an integral Gigabit PoE repeater/power splitter mounted to the equipment mounting plate. This Gigabit PoE splitter is used to power the thermostat controlled DC cooling fan as well as providing data+power to one or two PoE enabled devices installed inside the enclosure. The PoE splitter is compatible with IEEE 802.3af/at standards and features 10/100/1000Mbps data speeds.

Dual PoE Powered Cooling Fans
To help manage internal temperatures due to increased heat typical in ceiling environments, the NF141206CVMFE1 features dual thermostat controlled PoE powered DC cooling fans. The low noise, high airflow fans help maintain lower internal temperatures. The fans turn on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Downward facing vent shrouds on the side of the enclosure help prevent water and falling debris from entering.    

No-Drill Non-Metallic Equipment Plate
This enclosure includes a no-drill non-metallic 1/4" thick PVC equipment mounting plate. Due to the "No-Drill" design of this plate, mounting radios and other equipment can be done simply by using self-tapping screws.

RF Transparent Design
The NF141206CVMFE1 is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will accommodate a wide range PoE wireless equipment.

Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps.

Cable Glands
This enclosure features three of our unique PG-16 cable glands. The first is a specially designed cable gland which will allow a pre-terminated Ethernet cable to be fed into the enclosure. The second two glands feature a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.

Customization
We offer custom enclosures for WiFi equipment, DIN Mount Industrial Controls, Telephone Call Boxes, IP Phones, Security & Safety, Building Automation and More. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans, heaters. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.

Technical Specifications

Material	Fiberglass Reinforced Polyester
Color	Gray
Cooling Fan Turn-On Temperature	100°F (38°C) ±6°F
Cooling Fan Turn-Off Temperature	79°F (26°C) ±9°F
PoE Voltage	44-57 VDC
PoE Input Power	30W Max.
PoE Output Power	24W Max., Average 8W Per Port
Data Speed	10/100/1000 Mbps
PoE Protocol	IEEE 802.3at (30W), IEEE 802.3af (15.4W)
PoE Pinouts	Pins 1/2 (-) Pins 3/3 (+) Pins 4/5 (+) Pins 7/8 (-)
Outer Dimensions (Height x Width x Depth)	15.7 x 13.8 x 8.0 Inches (401 x 352 x 205 mm)
Inner Dimensions* (Height x Width x Depth)	13.0 x 9.7 x 5.4 Inches (330 x 248 x 137 mm)
Mounting Plate Material	0.25 in (6.4 mm) PVC
Mounting Plate Dimensions	10.9 x 12.8 in. (276 x 324 mm)
Weight	10.6 lbs. (4.8 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	UL94-5V

*See drawing for detailed dimensions of maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.