Altelix Fiberglass Weatherproof Starlink® / Ubiquiti® Mesh Enclosure with Heater, Cooling Fan, 120 VAC Outlets & Power Cord

Industrial Grade Protection and Easy Deployment

Designed to combine two industry-leading technologies, Starlink® Internet and Ubuquiti® Mesh technology into a secure single-box weatherproof solution, this heated and fan cooled enclosure is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The aluminum equipment mounting plate features four pre-wired 120VAC power outlets. 

Install the Ubiquiti® and Starlink® Devices into a Single Enclosure
This enclosure features our specialized mounting system which integrates the Starlink® and Ubiquiti® devices into a single unified bracket that also provides cable management as well as provision for both the Starlink® Ethernet Adapter and the Ubiquiti® PoE Power Supply. This provides the ultimate protection of these sensitive components and simplifies deployment.

Easy Setup
This enclosure provides easy installation of the Starlink® and Ubiquiti® components, only a screwdriver is needed. Installation requires the use of the mounting brackets included Starlink® Power Supply as well as the Access Point and PoE Power Supply mounting brackets included with the Ubiquiti® UAP-AC-M. There are provisions inside the enclosure to mount all the required mounting brackets. Once the devices are installed, connect their power cables to the internal 120VAC power outlets. Included with the enclosure are Altelix's specialized cable glands include one specially designed to accommodate the Starlink® antenna cable. Once all the components are secured, plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running. The power cord can be easily removed, and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.

Fan Cooling with Thermostat Control
This enclosure features two 4" vents and a thermostat controlled cooling fan which helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all the power outlets available for the Starlink® Router and power supply.

200W Thermostat Controlled Heater
This enclosure is equipped for harsh weather and cold environments. It features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is mounted below the equipment plate and wired internally which leaves the interior space and power outlets available for the Starlink® router and power supply.

Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent so that it will not interfere with the WiFi signal range or coverage pattern of the Starlink® WiFi Router. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps.

Mounting
Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available.

Customization
We offer custom enclosures for WiFi equipment, DIN Mount Industrial Controls, Telephone Call Boxes, IP Phones, Security & Safety, Building Automation and More. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans, heaters. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.

Starlink® is a trademark or registered trademark of Space Exploration Technologies Corp., Ubiquiti UniFi® is a trademark or registered trademark of Ubiquiti Networks, Inc.

Technical Specifications

Material	Fiberglass Reinforced Polyester
Color	Gray
Voltage	120VAC
Max Load	10A @ 120VAC
Cooling Fan Turn-On Temperature	100°F (38°C) ±6°F
Cooling Fan Turn-Off Temperature	79°F (26°C) ±9°F
Heater Turn-On Temperature	43°F (6°C) ±5°F
Heater Turn-Off Temperature	59°F (15°C) ±5°F
Heater Power	200 Watts
Outer Dimensions	15.7 x 13.8 x 10.1 Inches (401 x 352 x 258 mm)
Inner Dimensions	13.0 x 11.0 x 5.0 Inches (330 x 279 x 127 mm)
Mounting Plate Material	0.10 in (2.5 mm) Aluminum
Mounting Plate Dimensions	10.9 x 12.8 in. (276 x 324 mm)
Weight	15.8 lbs. (7.1 kg)
Power Cord Length	5 Feet (1.5m)
Terminal Block Wire Range	12-18 AWG
Terminal Block Wire Strip Length	6-7mm
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	UL94-5V
Compatible Ubiquiti® Model	Ubiquiti UniFi® UAP-AC-M Mesh Access Point

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.