The Altelix Starlink Gen 3 Enclosure is a weatherproof fan-cooled enclosure designed to provide the ultimate protection for the Starlink® Gen 3 Wi-Fi Router and Power Supply. It is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet.
Multi Function Mounting Brackets
The Altelix Starlink® Gen 3 enclosure features innovated multi function mounting brackets which are designed to easily mount both the Starlink® Gen 3 Router and Starlink® Power Supply. These mounting brackets also provide an easy to use cable management system for all the required cables.
Install Your Starlink® Gen 3 Router Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.
RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.
Plug and Play Setup
The Altelix Starlink Gen 3 enclosure provides easy plug-n-play installation. Once the Starlink® Gen 3 Router and Power Supply are securely mounted inside the enclosure, connect the power supply to the internal 120VAC power outlet. Custom cable glands on the enclosure allows both the Starlink® antenna cable and an Ethernet cable to be connected. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.
Cooling Fan Ventilation
To keep your Starlink® router running cool, this enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure.
The NP17VMFA1C-STK3 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.
Starlink® is a trademark or registered trademark of Space Exploration Technologies Corp.
|PC+ABS Polycarbonate / ABS Blend
|Gray, Black, OD Green, Light Ivory
|10A @ 120VAC
|Cooling Fan Turn-On Temperature
|100°F (38°C) ±6°F
|Cooling Fan Turn-Off Temperature
|79°F (26°C) ±9°F
|16.5 x 13.7 x 6.5 Inches
(420 x 348 x 165 mm)
|Mounting Plate Material
|0.25 in. (6.4mm) PVC
|6.8 lbs. (3.0 kg)
|Power Cord Length
|5 Feet (1.5m)
|NEMA Type 3R, 3RX / IP24
|Compatible Starlink® Model
|Starlink® Gen 3 Router - Model #UTR-232
Starlink® Power Supply - Model #UTP-232C
NEMA Ratings and IP Equivalency Chart
Need a pole mount kit, an extra set of enclosure keys or something else? Click on ADD TO CART below to see all the available accessories for this enclosure.