Altelix Vented Ceiling Mount Enclosure - 14x11x7 Polycarbonate + ABS

The Altelix NP141107CV Vented Ceiling Mount Enclosure is ideal for protecting devices from harsh environments and tampering while allowing ventilation for installed equipment. Downward facing vent shrouds on the side of the enclosure help prevent water and falling debris from entering.

Designed for Ceiling Mount Applications
The NP141107CV is intended for installation on ceilings in settings such as industrial facilities, commercial buildings, or institutional environments. It can be attached to a wide range of ceiling structures. Optional pole mount kits are also available to mount the enclosure to overhead pipes or truss systems.

Equipment Mounting Options
This enclosure provides multiple ways to install equipment. Raised bosses located in the base of this enclosure can be used to mount an equipment plate. These same bosses can also be used to install up to five (5) 35mm Top Hat DIN Rail kits available from Altelix. A large flat section is also provided in the base for use with the hook-n-loop tape included in the accessory kit.

In addition to the raised bosses this enclosure can be purchased with either an Aluminum or Non-Metallic PVC equipment mounting plates. The 1.5mm thick aluminum equipment mounting plate can be easily drilled and modified by the installer. Ideal for wireless applications, the RF transparent 10mm thick PVC equipment mounting plate features a No-Drill design. Mounting radios and other equipment can be easily done simply by using self-tapping screws.

RF Transparent Design
The NP141107CV is ideal for WiFi applications. The non-metallic design of the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless access points on the market.

Secure Your Equipment
These NP series enclosures feature a gasketed lid with dual stainless steel quick release latches. A stainless steel security screw with keys and a provision for a padlock are also provided.

Polycarbonate + ABS Protection Built to Last
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

Multi-Port Cable Gland
Pre-installed is our unique multi-cable cable gland. This cable gland can accommodate up to five pre-terminated cables such as Ethernet or Video cables. This helps reduce the number of cable glands needed and allows the cables to be better bundled together. Plugs are provided to seal any unused ports in the cable gland.

Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets and cable glands that can be installed in the knock-out holes for a weather resistant seal. Also included in the accessory kit are wall anchors, zip ties, wire management loops, hook-n-loop tape, ground wire, (2) door locking keys and more.

Customization
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.

Technical Specifications

Material	PC+ABS Polycarbonate / ABS Blend
Color	Gray
Outer Dimensions (Height x Width x Depth)	14.2 x 11.6 x 6.9 Inches (361 x 293 x 176 mm)
Inner Dimensions* (Height x Width x Depth)	11.7 x 8.7 x 5.2 inches (297 x 220 x 132 mm)
Weight	5.1 lbs. (2.3 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Industry Certifications	CE
Knockout Sizes (Diameter)	(3) 0.62 in. (16 mm) (4) 1.02 in. (26 mm) (1) 1.30 in. (33 mm)
Optional PVC Equipment Mounting Plate
Mounting Plate Material	0.40 in. (10mm) PVC
Mounting Plate Size	11.5 x 8.5 in. (294 x 216 mm)
Optional Aluminum Equipment Mounting Plate
Mounting Plate Material	0.06 in. (1.5mm) Aluminum
Mounting Plate Size	11.5 x 8.5 in. (294 x 216 mm)

*See drawing for detailed dimensions of maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.