Description
Features
| Applications
|
The Altelix NP17VFA1C-NTG1 Enclosure is a weatherproof fan-cooled enclosure designed to provide indoor or outdoor protection for the Netgear® Nighthawk® R6700AX and RAX10 WiFi routers.
Install Your Netgear® Router Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.
Router Mounting System
The mounting bracket installed inside the enclosure featured two key-slot pins used to secure the Nighthawk® router to the plate. Simply line up the keyholes in the router with the key-slot pins on the mounting bracket and slide down to lock into place. To remove the router, press down on the thumb lock release and slide up.
RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.
Plug and Play Setup
The NP17VFA1C-NTG1 enclosure provides easy plug-n-play installation. Once the Nighthawk® router is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland on the enclosure allows cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.
Cooling Fan Ventilation
The NP17VFA1C-NTG1 enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure.
Mounting
The NP17VFA1C-NTG1 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.
Netgear® and Nighthawk® is a trademark or registered trademark of Netgear, Inc.
Technical Specifications
| Material | PC+ABS Polycarbonate / ABS Blend |
| Available Colors | Gray, Black, OD Green, Light Ivory |
| Voltage | 120VAC |
| Max Load | 10A @ 120VAC |
| Cooling Fan Turn-On Temperature | 100°F (38°C) ±6°F |
| Cooling Fan Turn-Off Temperature | 79°F (26°C) ±9°F |
| Outer Dimensions | 16.5 x 13.7 x 6.5 Inches (420 x 348 x 165 mm) |
| Mounting Plate Material | 0.25 in. (6.4mm) PVC |
| Weight | 6.8 lbs. (3.0 kg) |
| Power Cord Length | 5 Feet (1.5m) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible Netgear® Models | R6700AX WiFi Router RAX10 WiFi Router |
 | NEMA Ratings and IP Equivalency Chart |
Downloads
Same Day Shipping -
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
