Altelix Weatherproof PoE Enclosure for YoLink® Hub

Power-over-Ethernet Solution for the YoLink® Hub

Now you can power your YoLink® Hub with a single Ethernet cable while providing added security from vandalism and protection from harsh environments.

Eliminate Running Multiple Cables
This enclosure features an internal PoE splitter which allows the YoLink® Hub to receive it's power and data from a single Ethernet cable. This eliminates the need for an AC outlet at the enclosure location. Using a separate PoE network router or switch, power is injected onto the Ethernet cable which is then connected to the PoE splitter inside the enclosure. From the splitter, separate data and power leads are connected to the YoLink® Hub. This is ideal for remote locations where power is not available.

RF Transparent Design Will Not Affect LoRa Signal
The YoLink® Hub enclosure is designed to be RF transparent. Components such as the enclosure itself, the YoLink® Hub mounting cradle and the equipment mounting plate will not affect the LoRa signal range or coverage pattern. One of the advantages of mounting the YoLink Hub in an enclosure outdoors is maximizing range for long range sensors and overcoming the signal loss from concrete or metal buildings.

Install Your YoLink® Hub Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. Two 2¼" inch air vents with rain shields and screens provide ventilation for the YoLink® Hub. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Mounting
The external mounting feet on the NP12VE1-YLK allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.

Installation Note:
The YoLink® Hub is currently available in two sizes. This mount is specifically designed for the YoLink® Hub measuring 4.33" x 4.33" square. It will not work with the smaller YoLink® Hub which measures 3.38" x 3.38" square. Please check the size of your YoLink® Hub before ordering to insure proper fit.

YoLink® is a trademark or registered trademark of YoSmart, Inc.

Technical Specifications

Material	Polycarbonate + ABS
Available Colors	Gray, Light Ivory, OD Green
PoE Standard	IEEE 802.3af/at
PoE Power Output	5V / 3A
PoE Data Speed	10/100/1000Mbps
PoE Power Pinout	+ VDC: Pins 1 & 2, - VDC: Pins 3 & 6 or + VDC: Pins 4 & 5, - VDC: Pins 7 & 8
Outer Dimensions (Height x Width x Depth)	13.1 x 10.2 x 5.9 Inches (334 x 259 x 151 mm)
Inner Dimensions* (Height x Width x Depth)	8.5 x 7.5 x 3.7 Inches (216 x 190 x 95 mm)
Mounting Plate Material	0.25 in. (6.4mm) PVC
Weight	2.6 lbs. (1.18 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Compatible YoLink® Model	YoLink® Hub (Model YS1603-UC)

*Interior dimensions represent maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.