Description
Features
| Applications
|
Protect Your YoLink® Hub Internet Gateway
The Altelix YoLink Hub Enclosure is a vented weatherproof enclosure designed to provide add security from vandalism and protection from harsh environments. It features two 2¼" vents with rain shields and screens for added ventilation to reduce heat buildup inside the enclosure.
RF Transparent Design Will Not Affect LoRa Signal
The YoLink® Hub enclosure is designed to be RF transparent. Components such as the enclosure itself, the YoLink® Hub mounting cradle and the equipment mounting plate will not affect the LoRa signal range or coverage pattern. One of the advantages of mounting the YoLink® Hub in an enclosure outdoors is maximizing range for long range sensors and overcoming the signal loss from concrete or metal buildings.
Install Your YoLink® Hub Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. Two 2¼" inch air vents with rain shields and screens provide ventilation for the YoLink® Hub. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.
Plug and Play Setup
The YoLink® Hub enclosure provides easy plug-n-play installation. Once the YoLink® Hub is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland installed on the enclosure will allow a terminated Ethernet cable to be connected directly to the YoLink® Hub. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.
Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
Mounting
The external mounting feet on the NP12VA1C-YLK1 allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.
Installation Note:
The YoLink® Hub is currently available in two sizes. This mount is specifically designed for the YoLink® Hub measuring 4.33" x 4.33" square. It will not work with the smaller YoLink® Hub which measures 3.38" x 3.38" square. Please check the size of your YoLink® Hub before ordering to insure proper fit.
YoLink® is a trademark or registered trademark of YoSmart, Inc.
Technical Specifications
| Material | Polycarbonate + ABS |
| Available Colors | Gray, Light Ivory, OD Green |
| Voltage | 120VAC |
| Max Load | 10A @ 120VAC |
| Outer Dimensions (Height x Width x Depth) | 13.1 x 10.2 x 8.0 Inches (334 x 259 x 204 mm) |
| Inner Dimensions* (Height x Width x Depth) | 8.5 x 7.5 x 5.8 Inches (216 x 190 x 147 mm) |
| Mounting Plate Material | 0.25 in. (6.4mm) PVC |
| Weight | 4.0 lbs. (1.8 kg) |
| Power Cord Length | 5 Feet (1.5m) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible YoLink® Model | YoLink® Hub (Model YS1603-UC) |
| *Interior dimensions represent maximum space available for equipment. |
 | NEMA Ratings and IP Equivalency Chart |
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
