Description
Features
| Applications
|
Protect Your TP-Link® EAP650 WiFi 6 Access Point
The Altelix NP12VA1C-TPL2 is a vented weatherproof enclosure designed to provide added security, vandalism and protection from harsh environments, while allowing ventilation for the TP-Link® EAP650 AX3000 WiFi 6 access point. It features two 2¼" inch air vents with rain shields and screens.
Install Your TP-Link® EAP650 Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.
Plug and Play Setup
The NP12VA1C-TPL2 enclosure provides easy plug-n-play installation. Simply attach the mounting bracket included with the TP-Link® EAP650 to the equipment mounting plate. The equipment mounting plate is pre-drilled so no tools are need other then a screw driver. Attach the access point to the mounting bracket and connect its power supply to the internal 120VAC power outlet. A cable gland and cable grommets on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.
RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.
Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
Mounting
The external mounting feet on the NP12VA1C-TPL2 allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.
Additional Products Available for TP-Link®
Altelix has a full line of enclosures designed for use with TP-Link® wireless products including a PoE version of this enclosure. Click Here to view all available products.
TP-Link® is a trademark or registered trademark of TP-Link, Corp.
Technical Specifications
| Material | Polycarbonate + ABS |
| Available Colors | Gray, Light Ivory, OD Green |
| Voltage | 120VAC |
| Max Load | 10A @ 120VAC |
| Outer Dimensions (Height x Width x Depth) | 13.1 x 10.2 x 5.9 Inches (334 x 259 x 151 mm) |
| Inner Dimensions* (Height x Width x Depth) | 8.5 x 7.5 x 3.7 Inches (216 x 190 x 95 mm) |
| Mounting Plate Material | 0.25 in. (6.4mm) PVC |
| Weight | 3.7 lbs. (1.7 kg) |
| Power Cord Length | 5 Feet (1.5m) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible TP-Link® Model | EAP650 AX3000 WiFi 6 Access Point |
| *Interior dimensions represent maximum space available for equipment. |
 | NEMA Ratings and IP Equivalency Chart |
Downloads
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
