Description
The Altelix NHM20A-A1 Power Module with 120VAC Outlets is designed for use with the Altelix NS Series painted steel enclosures and NX Series stainless steel enclosures. This power module is a direct replacement for the steel access panel included with the NS and NX enclosures.
Power Module
Ideal for installations that require hard-wiring for power, the NHM20A-A1 features two pre-wired duplex 120VAC power outlets (4 outlets total) which are easily removable for wiring. The panel is constructed from 0.10" (2.5mm) thick aluminum. A 1/2" Liquid-Tight conduit fitting is pre-installed in the panel. A PG16 cable gland is also provided for use with standard size power cables. Two sealed PG16 cable glands are also pre-installed to accommodate any required wiring such as data cables.
The NHM20A-A1 is for use with the following enclosures:
- NS242012 Series
- NS242412 Series
- NS242416 Series
- NX242416 Series
- NS242424 Series
- NS282416 Series
- NS282424 Series
- NS322416 Series
Available with Power Cord
This power module is also available with a pre-installed 5 foot 3-prong power cord. See NHM20A-A1C.
Technical Specifications
| Panel Material | Aluminum |
| Panel Thickness | 0.10 in. (2.5 mm) |
| Voltage | 120VAC |
| Hole Diameter for PG16 Cable Gland | 0.875 in. (22.2 mm) |
| Sealed Cable Gland - Cable Diameter Range* | 0.1" to 0.3" (2.5 to 7.6mm) |
| Max. Connector Size That Can Pass Through Sealed Cable Gland | 0.5" (12.7mm) Wide |
| *Note: For applications requiring larger cable diameters, the Altelix cable gland can be replaced with a standard PG-16 cable gland. |
Same Day Shipping - 
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
