Weatherproof Enclosure for Jandy® iAquaLink® Web-Connect Device - Includes Enclosure and Wall Mount Kit for the Jandy® AquaLink® Handheld Remote

Weatherproof Polycarbonate + ABS Construction For Extreme Durability

The Altelix NP120905M-JDY1 NEMA 4X enclosure is designed specifically for use with the Jandy® iAquaLink® Web-Connect Device. This durable weatherproof enclosure allows the wireless receiver to be mounted outdoors poolside or near the pool pump controls. It also helps protect it from theft or damage. 

Easy to Install
This enclosure features mounting plate pre-drilled to accept the Jandy® iAquaLink® Web-Connect Device. Simply attach using the included screws and run the wire through the pre-installed cable gland. This cable gland will allow a pre-terminated cable to pass through it will still providing a water-tight seal when tighten.

Construction and Features
These enclosures are molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66. The RF transparent design of both the enclosure and mounting plate will not interfere with the receiver's wireless operation.

Includes Wall Mount for the Jandy® AquaLink® Wireless Handheld Remote
Included with the enclosure is a sleek, purpose-built mounting and protection solution designed specifically for the Jandy® AquaLink® Wireless Handheld Remote. This holder keeps your valuable pool control remote securely stored, easily accessible, and always in the same convenient spot - whether indoors near the patio door, in the pool equipment area, or outdoors poolside. Say goodbye to misplaced remotes, accidental drops, or hunting around the backyard! This kit includes a durable TPU protective sleeve that fits over the Jandy® AquaLink® wireless handheld remote. This protective sleeve helps safeguard the remote from accidental damage caused by drops or misuse. Additionally, raised lips on the sleeve help protect the remote's screen if dropped on its face. Access to the battery compartment is provided in the rear of the sleeve. This kit can be wall mounted using the included screws or can be mounted to the inside lid of the enclosure using the include double-sided tape.

This wall mount remote kit can also be purchased separately. See the accessories section to purchase.

Multiple Mounting Options
This enclosure features (3) external mounting feet which can be used for wall mounting or with our optional pole mounting kits available in the accessories section. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.

Jandy®, AquaLink® and iAquaLink® are trademarks or registered trademarks of Fluidra USA, LLC.

Technical Specifications

Enclosure Specifications
Material	Polycarbonate + ABS
Color	Gray
Outer Dimensions	13.1 x 10.2 x 4.7 Inches (334 x 259 x 120 mm)
Inner Dimensions	9.4 x 7.5 x 3.5 Inches (239 x 190 x 89 mm)
Mounting Plate Material	0.25 in. (6.4 mm) PVC
Weight	2.7 lbs. (1.2 kg)
Ratings	Meets or Exceeds NEMA 1, 2, 4, 4X, 12, 13 and IEC 529 IP65, IP66
Flame Rating	Meets UL94-V0
Compatible Jandy® Models	iQ20-A Web-Connect Device iQ30-A Web-Connect Device
Remote Wall Mount Specifications
Wall Cradle Material / Color	PETG / White
Protective Sleeve Material / Color	TPU / Black
Wall Cradle Dimensions	4.0 x 6.2 x 1.3 inches (101.6 x 157.9 x 34.9 mm)
Total Weight	0.20 lbs (0.09 kg)
Compatible Jandy® Models	AquaLink® Model #AQWHR18 / R0687300

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.

  Same Day Shipping - Click Here for details.