Description
Features
| Applications
|
Vented Fan Cooled Weatherproof Polycarbonate + ABS Construction For Extreme Durability
The Altelix NP131004VFA1C features two 3" inch air vents and a thermostat controlled cooling fan. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries.
Construction and Features
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. It meets or exceeds NEMA 3R, 3RX and IP24.
Cooling Fan Ventilation
The NP131004VFA1C features two 3" inch air vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlet leaving it available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.
Power
This configuration consists of the PC+ABS NEMA enclosure with hinged lid and a 1.5mm thick aluminum plate with a 120VAC power outlet. A 5 foot pre-wired power cord is included to power the enclosure, so no additional wiring is required. A cable grommet on the enclosure allows cables to be connected to internal devices.
Complete with Cable Glands and Wire Management Straps
This enclosure includes 3 weatherproof cable glands. Simply punch out the seal, run your cable, and hand tighten for a water-tight seal. For convenience, the included accessory kit contains wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.
Technical Specifications
Material | Polycarbonate + ABS |
Available Colors | Gray, Light Ivory, OD Green |
Voltage | 120VAC |
Max Load | 10A @ 120VAC |
Cooling Fan Turn-On Temperature | 100°F (38°C) ±6°F |
Cooling Fan Turn-Off Temperature | 79°F (26°C) ±9°F |
Outer Dimensions (Height x Width x Depth) | 13.7 x 10.8 x 5.4 Inches (348 x 274 x 136 mm) |
Inner Dimensions* (Height x Width x Depth) | 7.0 x 7.8 x 2.3 Inches (178 x 197 x 57 mm) |
Mounting Plate Material | 0.06 in. (1.5mm) Aluminum |
Weight | 3.5 lbs. (1.6 kg) |
Power Cord Length | 5 Feet (1.5m) |
Ratings | Meets or Exceeds NEMA 3R, 3RX and IP24 |
Flame Rating | Meets UL94-V0 |
Included Cable Glands | (3) M24 x 1.5 |
*Interior dimensions represent maximum space available for equipment. See drawing for additional details. |
NEMA Ratings and IP Equivalency Chart |
Downloads
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.