Altelix 14x11x5 Polycarbonate + ABS Indoor / Outdoor RF Transparent WiFi Access Point Enclosure with PVC Non-Metallic Equipment Mounting Plate
- Usually Ships in 1 to 2 Business Days
For customization and volume pricing inquiries please Click Here to email us at email@example.com
Extreme Weatherproof Protection with Non-Metallic PVC Equipment Mounting Plate
The Altelix NP141105MP PC+ABS NEMA Enclosure with Aluminum Equipment Mounting Plate is an industrial quality weatherproof NEMA enclosure designed to offer extreme protection for small electronic devices outdoors and in harsh environments.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
These enclosures feature a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use.It meets or exceeds NEMA Type 3, 3X and IEC IP55.
Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
RF Transparent Design
The NP141105MP is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere the radio's operation. In addition, mounting radios to PVC equipment mounting plate can be done simply by using self-tapping screws. The size of this enclosure will fit a wide range of popular wireless points on the market.
Complete with Cable Grommets and Wire Management Accessories
This enclosure includes an assortment of cable grommets that can be installed in the knock-out holes for a weather resistant seal. The included accessory kit contains wall anchors, zip ties, wire management loops, grounding plate and ground wire, door locking key and more.
The Gray enclosure (NP141105MP) comes from the factory with two cable grommets and ground wire pre-installed. The other available colors do not have the cable grommets or ground wire installed but are included in the accessory kit.
Pole Mount Available
An optional pole mounting kit (NMK-0002) is also available for this enclosure.
|Material||Polycarbonate + ABS|
|Available Colors||Gray, Green, Red, Yellow|
|Outer Dimensions||13.4 x 11.5 x 5.0 Inches
(340 x 293 x 127 mm)
|Inner Dimensions||12.0 x 8.0 x 3.8 Inches
(304 x 203 x 97 mm)
|Mounting Plate Material||0.25 in. (6.4 mm) PVC Foam|
|Mounting Plate Dimensions||9.0 x 11.7 In. (230 x 298 mm)|
|Weight||3.3 lbs. (1.5 kg)|
|Ratings||NEMA Type 3, 3X, IP55|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 0.78 in. (20 mm)
(4) 1.30 in. (33 mm)
1) Interior dimensions represent maximum space available for equipment.
NEMA Ratings and IP Equivalency Chart