Altelix 14x11x5 Polycarbonate + ABS Vented Weatherproof NEMA Enclosure with Aluminum Mounting Plate
- Contact us for availability
For customization and volume pricing inquiries please Click Here to email us at email@example.com
The Altelix NP141105VP Vented Polycarbonate + ABS NEMA Weatherproof Enclosure is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.
Construction and Features
This enclosure is IP24 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use.
Aluminum Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 2.0mm thick aluminum plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
This enclosure features two 3 inch air vents. Rain shields help prevent rain water from entering the enclosure.
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting).
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||PC+ABS Polycarbonate / ABS Blend|
|Outer Dimensions||13.4 x 11.6 x 6.3 Inches
(340 x 294 x 161 mm)
|Inner Dimensions*||12.0 x 8.0 x 4.0 Inches
(305 x 203 x 102 mm)
|Mounting Plate Material||0.08 In. (2.0 mm) Aluminum|
|Mounting Plate Dimensions||9.0 x 11.7 In. (230 x 298 mm)|
|Weight||4.0 lbs. (1.7 kg)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|Flame Rating||Meets UL94-V0|
|Knockout Sizes (Diameter)||(4) 0.62 in. (16 mm)
(4) 0.78 in. (20 mm)
(4) 1.30 in. (33 mm)
1) Interior dimensions represent maximum space available for equipment.
NEMA Ratings and IP Equivalency Chart