Altelix 14x12x6 Fiberglass Weatherproof Heated NEMA Enclosure with 200W Heater & 120 VAC Outlets
- Usually Ships in 3 to 5 Business Days
For customization and volume pricing inquiries please Click Here to email us at email@example.com
Heated NEMA 4X Protection with Power Outlets
The Altelix NF141206HA1 Heated NEMA Enclosure is deal for cold environments. It features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is mounted below the equipment plate and wired internally so leaves the interior space and power outlets available for your equipment. An insulated extreme cold weather model is also available with a 400W heating system.
120VAC Power Outlets
This enclosure features four pre-wired 120VAC power outlets. A terminal strip provides easy wiring by a qualified installer.
Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The generous size of this enclosure accommodates a wide range of equipment.
The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Removable Terminal Block
This enclosure features our 120VAC top entry terminal block. It is easily removable which helps simplify on-site wiring. It can accept wires sizes from 12 to 18 AWG. The wires are secured by side terminal screws.
Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available: painted steel ( NMKS-300-08) and stainless steel (NMKX-300-08).
We offer custom enclosures for WiFi equipment, DIN Mount Industrial Controls, Telephone Call Boxes, IP Phones, Security & Safety, Building Automation and More. Options include equipment mounting plates, DIN rails, AC/DC power, vents, cooling fans, heaters. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||Fiberglass Reinforced Polyester|
|Max Load||15A @ 120VAC|
|Heater Turn-On Temperature||43°F (6°C) ±5°F|
|Heater Turn-Off Temperature||59°F (15°C) ±5°F|
|Heater Power||200 Watts|
|Terminal Block Wire Range||12-18 AWG|
|Terminal Block Wire Strip Length||6-7mm|
|Outer Dimensions||15.7 x 13.8 x 6.5 Inches
(401 x 352 x 165 mm)
|Inner Dimensions*||13.0 x 11.0 x 4.5 Inches
(330 x 279 x 114 mm)
|Mounting Plate Material||0.10 in (2.5 mm) Aluminum|
|Mounting Plate Dimensions||10.9 x 12.8 in. (276 x 324 mm)|
|Weight||11.4 lbs. (5.2 kg)|
|Ratings*||NEMA Type 4, 4X / IP66|
1) Enclosure ports must be properly sealed to maintain NEMA Type 4, 4X / IP66 rating.
2) See drawing for detailed dimensions of maximum space available for equipment.
NEMA Ratings and IP Equivalency Chart
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov