Altelix 16x12x8 Vented Fiberglass Weatherproof NEMA Enclosure with 120 VAC Outlets & Power Cord, 200W Heater & 85°F Turn-On Cooling Fan
- Contact us for availability
For customization and volume pricing inquiries please Click Here to email us at email@example.com
|Features ||Applications |
The Altelix NFC161208VFHA1C-85 Heated and Fan Cooled Weatherproof NEMA Enclosure with 120VAC Power and Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
Construction and Features
This rugged enclosure is molded from durable and UV resistant fiberglass reinforced polyester (FRP). The door is fully gasketed making this enclosure suitable for use indoors or outdoors. The lockable door features reinforced hinges and dual quarter-turn latches to secure the enclosure and is locked and unlocked using the included removable keys. A drip rail over the door provides additional protection against water dripping into the cabinet while the enclosure is wet.
Bonus Aluminum Bottle Opener Key
This enclosure now includes our HN-0008 Aluminum Bottle Opener Key. A $9.99 value, this heavy duty aluminum door locking key easily attaches to most key chains. And it makes a great bottle opener too!
This configuration consists of the vented fiberglass NEMA enclosure with hinged lid and a equipment mounting plate with two pre-wired 120VAC power outlets.
Plug and Play
The NFC161208VFHA1C-85 features a 5 foot pre-wired power cord to provide power to the internal 120VAC outlets, so no additional wiring is required. Simply mount the enclosure then plug the power cord into a 120VAC outlet.
85°F Turn-On Cooling Fan
The NFC161208VFHA1C-85 is designed for applications which require the cooling fan to turn on at a lower temperature then our standard fan cooled enclosures. The low noise, high airflow fan turns on when the internal temperature reaches 85°F (30°C) and turns off when it drops to 59°F (15°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. The dual 4" vents feature rain shrouds on the front door keep rain water from entering the enclosure, and the internal screens are removable for cleaning. Dual fans are also available by request.
Ideal for cold environments, this model also features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is situated below the mounting plate and wired internally so it does not interfere with user installed equipment or require the use of the AC outlets. An insulated extreme cold weather model is also available with a 400W heating system.
Equipment Mounting Plate
The equipment mounting plate is provided for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.
The enclosure features our unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Four mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. Two optional flange and pole mounting kits are available, painted steel (model NMKS-300-08) and stainless steel (model NMKX-300-08).
Optional Lockable Latches
For additional protection of internal equipment installed, three lockable latches are available. The HN-0005 is a keyed lock set which includes two keys. Similar to the HN-0005, the HN-0001 has an interlock feature that traps the key when it is in the unlocked position. The HN-0006 allows the enclosure to be securely locked via use of a padlock (not included). All of these optional lockable latches are direct replacements for the standard quarter-turn latches that come pre-installed in the enclosures.
This enclosure is one of many possible configurations available by special order. We offer many options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. For pricing and availability inquiries please contact us with your specific project requirements and quantities.
|Material||Fiberglass Reinforced Polyester|
|Max Load||10A @ 120VAC|
|Cooling Fan Turn-On Temperature||85°F (30°C) ±6°F|
|Cooling Fan Turn-Off Temperature||59°F (15°C) ±9°F|
|Heater Turn-On Temperature||43°F (6°C) ±5°F|
|Heater Turn-Off Temperature||59°F (15°C) ±5°F|
|Heater Power||200 Watts|
|Outer Dimensions |
(Height x Width x Depth)
|15.7 x 11.9 x 9.4 Inches |
(398 x 302 x 239 mm)
|Inner Dimensions* |
(Height x Width x Depth)
|10.5 x 10.0 x 3.7 Inches |
(267 x 254 x 95 mm)
|Equipment Plate Dimensions||9.7 x 13.9 In. (246 x 353 mm)|
|Power Cord Length||5 Feet (1.5m)|
|Weight||12 lbs. (5.4 kg)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|*Interior dimensions represent maximum space available for equipment.|
NEMA Ratings and IP Equivalency Chart
Need a pole mount kit or an extra set of enclosure keys? Click on ADD TO CART below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov