Altelix 28x24x24 Steel Pad Mount Cabinet NEMA Enclosure with Plinth and Dual Cooling Fans

The Altelix NS282424LVFA1C-SM Steel Fan Cooled Weatherproof Slab Mount Enclosure features a heavy duty 16 gauge steel powder coated plinth for securing the enclosure to a concrete slab or floor.  This 4" (101.6mm) tall plinth easily attaches to the bottom of the enclosure using hardware provided. This is ideal in applications which require the enclosure to be easily accessible as well as protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.

Dual Door Mounted Cooling Fans Ventilation
This enclosure features two (2) thermostat controlled 120mm cooling fans. These door mounted low noise, high airflow fans provide better air flow through the enclosure than bottom mounted fans and help maintain lower internal temperatures. The fans turn on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Both fans are wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Powder coated aluminum rain shrouds on the front door keep rainwater from entering the enclosure. For applications which require the cooling fan to turn on at a lower temperature, this enclosure is also available with a 85°F (30°C) turn-on thermostat. With this option the fan turns on when the internal temperature reaches 85°F (30°C) and turns off when it drops to 59°F (15°C).

Construction and Features
This rugged pedestal mount enclosure features continuous seam welded 18 Gauge (1.2mm thick) steel construction. The enclosure door is fully gasketed making this enclosure suitable for use indoors or outdoors. The door features reinforced hinges and dual quarter-turn latches to secure the enclosure. Internal grounding studs are provided on both the door and enclosure. Both the enclosure and plinth are finished in a rugged epoxy polyester textured light gray powder coat finish.

Removable Power Module
The NS282424LVFA1C-SM features a removable power module that attaches to the bottom of the enclosure. Constructed of rugged aluminum, this can be easily removed for servicing and is fully gasketed to ensure a proper seal. This power module features two pre-wired duplex 120VAC power outlets (4 outlets total). To provide power to the enclosure a 1/2" Liquid-Tight fitting as well as a PG16 Cable Glands are included.

Galvanized Steel Equipment Plate
This configuration consists of the steel NEMA enclosure with hinged door and a 18 Gauge (1.2mm thick) zinc coated galvanized steel plate for mounting and securing equipment. The enclosure and plate can be drilled and modified by the installer to suit unique site requirements.

Cable Glands
The enclosure features two unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.

Bonus Aluminum Bottle Opener Key
This enclosure now includes our HN-0008 Aluminum Bottle Opener Key. A $9.99 value, this heavy duty aluminum door locking key easily attaches to most key chains. And it makes a great bottle opener too!

Optional Lockable Latches
For additional protection of internal equipment installed, two lockable latches are available. The HN-0005 is a keyed lock set which includes two keys. The HN-0006 allows the enclosure to be securely locked via use of a padlock (not included). Both the HN-0005 and HN-0006 are direct replacements for the standard quarter-turn latches that come pre-installed in the enclosures.

Customization
This enclosure is one of many standard models available. Our lineup includes enclosures specifically tailored for WiFi equipment, DIN Mount Industrial Controls, POTS Telephones, IP Phones, Device Charging Stations, Security & Safety Equipment, Building & Home Automation and More.

We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.

Technical Specifications

Material	Continuous Seam Welded 18 Gauge (1.2mm) Steel
Color	Light Gray (RAL 7035)
Voltage	120VAC
Max Load	10A @ 120VAC
Cooling Fan Turn-On/Off Temperature Standard Thermostat	On: 100°F (38°C) ±6°F Off: 79°F (26°C) ±9°F
Cooling Fan Turn-On/Off Temperature Optional Thermostat	On: 85°F (30°C) ±6°F Off: 59°F (15°C) ±9°F
Exterior Dimensions (Height x Width x Depth)	27.5 x 23.6 x 25.1 Inches (699 x 600 x 638 mm)
Interior Dimensions* (Height x Width x Depth)	22.0 x 20.0 x 21.0 Inches (559 x 508 x 533 mm)
Enclosure Plinth Material	16 Gauge Powder Coated Steel
Enclosure Plinth Dimensions	24 x 24 x 4 in. (609.9 x 609.6 x 101.6 mm)
Equipment Plate Material	18 Gauge (1.2mm) Zinc Coated Galvanized Steel
Equipment Plate Dimensions	26.2 x 21.6 In. (665 x 550 mm)
Weight	78.1 lbs. (35.4 kg)
Ratings	NEMA Type 3R, 3RX / IP24

*Notes: 1) Interior dimensions represent maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.