Description
Features
| Applications
|
The Altelix NP17VFA1C-NUC1 Enclosure is a weatherproof fan-cooled enclosure designed to provide the ultimate protection for the ASUS® / Intel® NUC Pro Mini PC and is ideal for rapid deployment because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet.
NUC Pro Mini PC Mounting Cradle
The Altelix NUC enclosure includes an easy to use mounting cradle designed specifically for the NUC Pro Mini PC. It securely holds and NUC Pro Mini PC while providing access to all ports without restricting airflow for cooling. To mount the NUC Pro Mini PC power supply an additional mounting bracket is provided with retention straps to keep it in place. This enclosure is compatible with the following NUC Pro Mini PCs:
- ASUS® / Intel® NUC Pro 13 Mini PC
- ASUS® / Intel® NUC Pro 12 Mini PC
- ASUS® / Intel® NUC Pro 11 Mini PC
- Intel® NUC Pro 10 Mini PC*
*Installation Note:
Installation of the Intel® NUC Pro 10 Mini PC requires an additional spacer which is included with the enclosure.
Install Your NUC Pro Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.
Plug and Play Setup
The NP17VFA1C-NUC1 enclosure provides easy plug-n-play installation. Once the NUC Pro Mini PS and power supply are securely mounted inside the enclosure, connect the power supply to the internal 120VAC power outlet. Cable glands on the enclosure allows cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running.
Cooling Fan Ventilation
To keep your NUC Pro Mini PC running cool, this enclosure features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets. Rain shrouds on the front door keep rain water from entering the enclosure.
Mounting
The NP17VFA1C-NUC1 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.
Intel® is a trademark or registered trademark of Intel Corp., ASUS® is a trademark or registered trademark of ASUSTeK Computer Inc.
Technical Specifications
| Material | PC+ABS Polycarbonate / ABS Blend |
| Available Colors | Gray, Black, OD Green, Light Ivory |
| Voltage | 120VAC |
| Max Load | 10A @ 120VAC |
| Cooling Fan Turn-On Temperature | 100°F (38°C) ±6°F |
| Cooling Fan Turn-Off Temperature | 79°F (26°C) ±9°F |
| Outer Dimensions | 16.5 x 13.7 x 6.5 Inches (420 x 348 x 165 mm) |
| Mounting Plate Material | 0.25 in. (6.4mm) PVC |
| Weight | 7.6 lbs. (3.4 kg) |
| Power Cord Length | 5 Feet (1.5m) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible NUC Models | ASUS® / Intel® NUC Pro 13 Mini PC ASUS® / Intel® NUC Pro 12 Mini PC ASUS® / Intel® NUC Pro 11 Mini PC Intel® NUC Pro 10 Mini PC* |
| *Spacer required, included with enclosure. |
 | NEMA Ratings and IP Equivalency Chart |
Downloads
Same Day Shipping -
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
