Description
Features
| Applications
|
The Altelix Vented nanoHD Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection for the Ubiquiti Unifi® U6+ access point. This non-powered enclosure is ideal for installations powering the Ubiquiti Unifi® U6+ via PoE only.
Install Your U6+ Access Point Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® U6+. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.
Easy Setup
The equipment mounting plate of the NP14VM-UBQ-02 is pre-drilled to except the mounting bracket that comes with the Ubiquiti UniFi® U6+. Simply attach the mounting bracket to the plate and then install the access point. Once the U6+ is securely mounted inside the enclosure, a special cable gland on the enclosure will allow a terminated Ethernet cable to be connected to the access point.
RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.
Mounting
The NP14VM-UBQ-02 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.
Additional Enclosures for Ubiquiti® Wireless Equipment
In addition to this enclosure, Altelix has enclosure for a wide range of Ubiquiti® wireless access points and extenders. Click Here to view all available models.
Ubiquiti UniFi® is a trademark or registered trademark of Ubiquiti Networks, Inc.
Technical Specifications
| Material | PC+ABS Polycarbonate / ABS Blend |
| Available Colors | Gray, Black, Light Ivory, OD Green |
| Outer Dimensions | 13.4 x 11.5 x 6.7 Inches (340 x 293 x 159 mm) |
| Inner Dimensions | 12.0 x 8.0 x 3.8 Inches (304 x 203 x 97 mm) |
| Mounting Plate Material | 0.25 In. (6.4 mm) PVC |
| Mounting Plate Dimensions | 9.0 x 11.7 In. (230 x 298 mm) |
| Weight | 4.0 lbs. (1.7 kg) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible Ubiquiti® Model | Ubiquiti Unifi® U6+ |
 | NEMA Ratings and IP Equivalency Chart |
Downloads
Same Day Shipping -
Need a pole mount kit, an extra set of enclosure keys or something else? Click the ADD-ONS and ACCESSORIES button below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
