Altelix Vented Weatherproof Enclosure for Ubiquiti UniFi® U6 Pro Access Point

The Altelix Vented U6 Pro Enclosure is a weatherproof enclosure designed to provide indoor or outdoor protection for the Ubiquiti Unifi® U6 Pro access point. This non-powered enclosure is ideal for installations powering the Ubiquiti Unifi® U6 Pro via PoE only.

Install Your U6 Pro Access Point Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock. Two 3" inch air vents with rain shields and screens provide ventilation for the Ubiquiti Unifi® U6 Pro. This enclosure meets or exceeds NEMA 3R, 3RX and IP24.

Easy Setup
The equipment mounting plate of the NP14VM-UBQ-05 is pre-drilled to except the mounting bracket that comes with the Ubiquiti UniFi® U6 Pro. Simply attach the mounting bracket to the plate and then install the access point. Once the U6 Pro is securely mounted inside the enclosure, a special cable gland on the enclosure will allow a terminated Ethernet cable to be connected to the access point. If for any reason the access point needs to be removed, a handy removal tool is included with the enclosure which disengages the access point from the mounting bracket. This removal tool mounts to the plate so it is always available for use.

RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Mounting
The NP14VM-UBQ-05 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.

Additional Enclosures for Ubiquiti® Wireless Equipment
In addition to this enclosure, Altelix has enclosure for a wide range of Ubiquiti® wireless access points and extenders. Click Here to view all available models.

Ubiquiti UniFi® is a trademark or registered trademark of Ubiquiti Networks, Inc.

Technical Specifications

Material	PC+ABS Polycarbonate / ABS Blend
Available Colors	Gray, Black, Light Ivory, OD Green
Outer Dimensions	13.4 x 11.5 x 6.7 Inches (340 x 293 x 159 mm)
Inner Dimensions	12.0 x 8.0 x 3.8 Inches (304 x 203 x 97 mm)
Mounting Plate Material	0.25 In. (6.4 mm) PVC
Mounting Plate Dimensions	9.0 x 11.7 In. (230 x 298 mm)
Weight	4.0 lbs. (1.7 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Compatible Ubiquiti® Model	Ubiquiti Unifi® U6 Pro

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.

  Same Day Shipping - Click Here for details.