Description
Features
|
Applications
|
Protection from Theft and Tampering
The Altelix Cellular Z-Wave Hub Enclosure is a vented weatherproof enclosure designed to provide added security from vandalism and protection from harsh environments, while allowing ventilation for the Alarm.com® or PointCentral® Hubs. It features two 3" inch air vents with rain shields and screens. By installing one of these hubs inside this enclosure, property managers can be rest assured that this equipment will not be tampered with.
Plug and Play Setup
This Altelix enclosure provides easy plug-n-play installation. Once the enclosure is mounted, install the hub into the mounting bracket and plug its power supply into the pre-wired 120VAC power outlet. Then plug the enclosure's 5 foot power cord into a 120VAC power outlet and you are up and running.
RF Transparent Design
The non-metallic design of the enclosure and equipment mounting plate is RF transparent and will not interfere with the wireless signal range or coverage pattern of the installed hubs.
Compatible Models
This enclosure is compatible with the following models:
- Alarm.com® Cellular Z-Wave Hub - Model #ADC-NK-200T
- PointCentral® Hub - Model #ADC-NK-100T-LTE
Rugged Polycarbonate + ABS Construction
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.
Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more. A pre-installed cable grommet is available if any additional cables need to be installed in the enclosure.
Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.
Alarm.com® and PointCentral® are trademarks or registered trademarks of Alarm.com, Inc.
Technical Specifications
| Material | Polycarbonate + ABS |
| Available Colors | Gray, Black, Light Ivory, OD Green |
| Voltage | 120VAC |
| Max Load | 10A @ 120VAC |
| Outer Dimensions (Height x Width x Depth) |
13.4 x 11.5 x 6.3 Inches (340 x 293 x 160 mm) |
| Inner Dimensions* (Height x Width x Depth) |
9.5 x 8.0 x 3.8 Inches (241 x 203 x 98 mm) |
| Mounting Plate Material | 0.25 in. (6.4mm) PVC |
| Weight | 4.1 lbs. (1.8 kg) |
| Power Cord Length | 5 Feet (1.5m) |
| Ratings | NEMA Type 3R, 3RX / IP24 |
| Flame Rating | Meets UL94-V0 |
| Compatible Hub Models | Alarm.com® Cellular Z-Wave Hub - Model #ADC-NK-200T PointCentral® Hub - Model #ADC-NK-100T-LTE |
| *Interior dimensions represent maximum space available for equipment. |
 |
NEMA Ratings and IP Equivalency Chart |
Same Day Shipping -
Need a pole mount kit, an extra set of enclosure keys or something else? Click on ADD TO CART below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
