Altelix 14x11x5 Vented DIN Rail Polycarbonate + ABS Weatherproof NEMA Enclosure

The Altelix NP141105VP-DIN Vented Polycarbonate + ABS NEMA DIN Rail Enclosure is ideal for protecting DIN rail mounted equipment from harsh environments and tampering. 

Includes (2) 35mm DIN Rails and Equipment Mounting Plate
Included with this enclosure are (2) 9" long 20 gauge steel 35mm top hat DIN rails. They easily attached to the 2.0mm thick aluminum equipment mounting plate included with the enclosure. Hardware for mounting the DIN rails and equipment mounting plate is included.

PC+ABS Polycarbonate / ABS Blend for Extreme Durability
These enclosures are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.

Construction and Features
This enclosure is IP24 rated and features a fully gasketed door to protect from dust and water ingress. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. There is also a provision for padlock use.

Ventilation
This enclosure features two 3 inch air vents. Rain shields help prevent rain water from entering the enclosure.

Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.

Accessory Kit
The accessory kit included with the enclosure contains the door locking key, rubber grommets, wall anchors and rubber bonded washers (used for wall mounting).

Technical Specifications

Material	PC+ABS Polycarbonate / ABS Blend
Available Colors	Gray, Black, Light Ivory, OD Green
Outer Dimensions	13.4 x 11.6 x 6.3 Inches (340 x 294 x 161 mm)
Inner Dimensions*	12.0 x 8.0 x 4.0 Inches (305 x 203 x 102 mm)
Mounting Plate Material	0.08 In. (2.0 mm) Aluminum
Mounting Plate Dimensions	9.0 x 11.7 In. (230 x 298 mm)
DIN Rail Length	9 In. (230 mm)
DIN Rail Material	20 Gauge (0.04 inch) Steel
Weight	4.0 lbs. (1.7 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Knockout Sizes (Diameter)	(4) 0.62 in. (16 mm) (4) 0.78 in. (20 mm) (4) 1.30 in. (33 mm)

*Notes: 1) Interior dimensions represent maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.