Altelix 14x12x8 Fiberglass Weatherproof Vented & Heated NEMA Enclosure for Cradlepoint® R500-PLTE, IBR600 and IBR900 Series LTE Routers with Cooling Fan, 200W Heater, 120 VAC Outlets & Power Cord
- Usually Ships in 1 to 2 Business Days
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
Industrial Grade All Weather Protection For Cradlepoint® LTE Routers
Designed to provide the ultimate protection for Cradlepoint® R500-PLTE, IBR600 and IBR900 Series LTE Routers, this heated and fan cooled enclosure is easy to install because no wiring is required. Simply mount the enclosure and plug the pre-wired 5 foot power cord into a nearby outlet. The aluminum equipment mounting plate features four pre-wired 120VAC power outlets for powering the Cradlepoint® LTE router and any additional equipment installed in the enclosure such as a digital signage multimedia player.
Get your project up and running quickly and transition to hard-wired later if needed. The power cord can be easily removed, and the quick-connect terminal strip simplifies hard-wiring by a qualified installer.
Plug and Play Setup
The NF14VFHA1C-CDP2 enclosure provides easy plug-n-play installation. The equipment mounting plate is pre-drilled to except the Cradlepoint® LTE router. Once the router is securely mounted to the plate, connect the power supply to the internal 120VAC power outlet. Cable glands on the enclosure allows cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into an outdoor outlet and you are up and running. The generous size of this enclosure and extended lid provides space for additional equipment to be installed such as the Brightsign® and NovaStar® multimedia players. This enclosure is compatible with the following Cradlepoint® LTE Routers:
- R500 Series - Model: R500-PLTE
- IBR600 Series - Model: IBR600B
- IBR600 Series - Model: IBR650B
- IBR600 Series - Model: IBR600C
- IBR600 Series - Model: IBR650C
- IBR900 Series - Model: IBR900
- IBR900 Series - Model: IBR950
Fan Cooling with Thermostat Control
This enclosure features two 4" vents and a thermostat controlled cooling fan which helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Rain shrouds keep rain water from entering the enclosure while allowing ventilation for installed equipment. The fan is wired internally, leaving all 4 power outlets available for installed equipment.
200W Thermostat Controlled Heater
This enclosure is equipped for harsh weather and cold environments. It features a thermostat controlled 200W heating system. The heater turns on when the internal temperature reaches 43°F (6°C) and turns off when it rises to 59°F (15°C). The heater is mounted below the equipment plate and wired internally so leaves the interior space and power outlets available for your equipment.
Extreme Protection Built to Last
This rugged JIC style NEMA box is molded from durable UV stable and corrosion resistant fiberglass reinforced polyester (FRP) with a UL94-5V flame rating. The FRP material is dent-proof, non-conductive and RF transparent for compatibility with wireless equipment. It can be easily drilled and modified by the installer as needed. It features a gasketed door with stainless steel continuous hinge and stainless steel quick release latches with padlock hasps.
Cable Glands Allow Pre-Terminated Cables To Be Used
The enclosure features two unique PG-16 cable glands with a closed inner seal. One for a HDMI cable and the other for USB or Ethernet cables. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal. Both these cable glands allow pre-terminated HDMI, USB and Ethernet cables to be used.
Stainless steel brackets are included for secure wall mounting. Optional flange and pole mounting kits are available. See available accessories when adding to cart.
In addition to this standard enclosure, Altelix can custom design and manufacture enclosures for your unique digital signage requirements. We offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
Cradlepoint® is a trademark or registered trademark of Cradlepoint, Inc., BrightSign® is a trademark or registered trademark of BrightSign, LLC., NovaStar® is a trademark or registered trademark of Xi'an NovaStar Tech Co. Ltd.
|Material||Fiberglass Reinforced Polyester|
|Max Load||10A @ 120VAC|
|Cooling Fan Turn-On Temperature||100°F (38°C) ±6°F|
|Cooling Fan Turn-Off Temperature||79°F (26°C) ±9°F|
|Heater Turn-On Temperature||43°F (6°C) ±5°F|
|Heater Turn-Off Temperature||59°F (15°C) ±5°F|
|Heater Power||200 Watts|
|Outer Dimensions||15.7 x 13.8 x 10.1 Inches
(401 x 352 x 258 mm)
|Inner Dimensions*||13.0 x 11.0 x 5.0 Inches
(330 x 279 x 127 mm)
|Mounting Plate Material||0.10 in (2.5 mm) Aluminum|
|Mounting Plate Dimensions||10.9 x 12.8 in. (276 x 324 mm)|
|Weight||13.4 lbs. (6.1 kg)|
|Power Cord Length||5 Feet (1.5m)|
|Terminal Block Wire Range||12-18 AWG|
|Terminal Block Wire Strip Length||6-7mm|
|Ratings||NEMA Type 3R, 3RX / IP24|
|Compatible Cradlepoint® Models||R500 Series - Model: R500-PLTE
IBR600 Series - Model: IBR600B
IBR600 Series - Model: IBR650B
IBR600 Series - Model: IBR600C
IBR600 Series - Model: IBR650C
IBR900 Series - Model: IBR900
IBR900 Series - Model: IBR950
|*See drawing for detailed dimensions of maximum space available for equipment.|
NEMA Ratings and IP Equivalency Chart
Need a pole mount kit or DIN rails? Click on ADD TO CART below to see all the available accessories for this enclosure.
WARNING: This product can expose you to chemicals including phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov