The Altelix L950 Enclosure is a vented weatherproof enclosure designed to provide indoor or outdoor protection for the Cradlepoint® L950 LTE Adapter. It features two 3" inch air vents with rain shields and screens to help expel excess heat from the enclosure.
Install Your Cradlepoint® LTE Adapter Securely Outdoors
This sleek enclosure is molded from weatherproof UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS, for extreme durability. The door features reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure. The wall mounting screws are concealed securely within the enclosure to prevent tampering. There is also a provision for a padlock.
LTE Adapter Mounting System
The mounting bracket installed inside the enclosure features two key-slot pins used to secure the Cradlepoint® L950 LTE adapter to the plate. Simply line up the keyholes in the L950 with the key-slot pins than slide down to lock into place. To remove the L950, press down on the thumb lock and slide up. Two cable glands are provided on the enclosure for any required cables.
RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the LTE signal range or coverage pattern.
The NP17VM-CDP1 enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for mounting on poles or fence posts.
Cradlepoint® is a trademark or registered trademark of Cradlepoint, Inc.
|PC+ABS Polycarbonate / ABS Blend
|Gray, Black, OD Green, Light Ivory
|16.5 x 13.7 x 6.5 Inches
(420 x 348 x 165 mm)
|Mounting Plate Material
|0.25 in. (6.4mm) PVC
|4.4 lbs. (2.0 kg)
|NEMA Type 3R, 3RX / IP24
|Compatible Cradlepoint® Model
|L950 LTE Adapter
NEMA Ratings and IP Equivalency Chart
Need a pole mount kit, an extra set of enclosure keys or something else? Click on ADD TO CART below to see all the available accessories for this enclosure.