Altelix 20x16x8 Vented Fiberglass Weatherproof NEMA Enclosure with 100-240 VAC Universal Power Outlet & Dual Cooling Fans
- Usually Ships in 3 to 5 Business Days
For customization and volume pricing inquiries please Click Here to email us at firstname.lastname@example.org
The Altelix NFC201608VFAU Vented Fan Cooled Weatherproof NEMA Enclosure with 100-240VAC Universal Power Outlet and Equipment Mounting Plate is ideal for protecting equipment from harsh environments and tampering. Equipment designed for indoor use can now be located outside.
Construction and Features
This rugged enclosure is molded from durable and UV resistant fiberglass reinforced polyester (FRP). The door is fully gasketed making this enclosure suitable for use indoors or outdoors. The lockable door features reinforced hinges and dual quarter-turn latches to secure the enclosure and is locked and unlocked using the included removable keys. A drip rail over the door provides additional protection against water dripping into the cabinet while the enclosure is wet.
Bonus Aluminum Bottle Opener Key
This enclosure now includes our HN-0008 Aluminum Bottle Opener Key. A $7.99 value, this heavy duty aluminum door locking key easily attaches to most key chains. And it makes a great bottle opener too!
This enclosure features a 100-240VAC universal power outlet supporting multiple international power standards outside the USA.:
- 110VAC 50/60Hz
- 115VAC 50/60Hz
- 220VAC 50/60Hz
- 230VAC 50/60Hz
- 240VAC 50/60Hz
Universal Power Outlet
The universal 100-240 VAC power outlet is compatible with the following plug types:
- UK/Ireland BS 1363
- Italy CEI 23-16/VII
- Denmark Afsnit 107-2-D1
- Euro plug (2-pin) CEE 7/16
- Australia Type I
- India BS 546
For the following plugs types, please refer to the safety notes in the Technical Specs:
- Swiss (2-pin) SEV 1011
- Israel SI 32
- North America (2-pin) NEMA 1-15 and (3-pin) NEMA 5-15
- Continental Europe (Schuko) CEE 7
- France/Belgium CEE 7
Optional Pre-Wired Power Cords
Ideal for Plug-and-Play installations, this enclosure can be purchased with a pre-wired 5 foot power cord and plug. Available plug types include United Kingdom (UK), European Union (EU), Switzerland (SW) and Australia (AUS). For a complete listing of all compatible countries by plug type, Click Here.
Dual Cooling Fans Ventilation
This enclosure features dual 4" vents and dual thermostat controlled 100-240 VAC cooling fans. The low noise, high airflow fans helps maintain lower internal temperatures by allowing air to be either pushed or pulled through the enclosure. The fans turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Both fans are wired internally so it does not require the use of the outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure, and the internal aluminum mesh filters are removable for cleaning.
The enclosure features our unique PG-16 cable glands with a closed inner seal. They are installed in the open ports to maintain the NEMA rating of the enclosure when not in use. When required for use, simply punch a hole through the inner membrane, run your cables and tighten for a water-tight seal.
Four mounting feet are included so that the enclosure can be securely mounted to a wall or other structure. Two optional flange and pole mounting kits are available, painted steel (model NMKS-400-08) and stainless steel (model NMKX-400-08).
Optional Lockable Latches
For additional protection of internal equipment installed, three lockable latches are available. The HN-0005 is a keyed lock set which includes two keys. Similar to the HN-0005, the HN-0001 has an interlock feature that traps the key when it is in the unlocked position. The HN-0006 allows the enclosure to be securely locked via use of a padlock (not included). All of these optional lockable latches are direct replacements for the standard quarter-turn latches that come pre-installed in the enclosures.
This enclosure is one of many standard models available. Our lineup includes enclosures specifically tailored for WiFi equipment, DIN Mount Industrial Controls, POTS Telephones, IP Phones, Device Charging Stations, Security & Safety Equipment, Building & Home Automation and More.
We offer numerous standard models and options including equipment mounting plates, DIN rails, AC or DC power, air vents, cooling fans and heaters and more. We also offer full customization, engineering and on-site CNC machining of enclosures and associated equipment, all with quick turnaround time. Please contact us with your unique requirements.
|Material||Fiberglass Reinforced Polyester|
|Universal Outlet Compatibility||UK/Ireland BS 1363
Italy CEI 23-16/VII
Denmark Afsnit 107-2-D1
Euro plug (2-pin) CEE 7/16
India BS 546
Australia Type I
Swiss (2-pin) SEV 1011**
Israel SI 32**
North America (2-pin) NEMA 1-15**
North America (3-pin) NEMA 5-15**
Continental Europe (Schuko) CEE 7**
France/Belgium CEE 7**
|Cooling Fans Turn-On Temperature||100°F (38°C) ±9°F|
|Cooling Fans Turn-Off Temperature||79°F (26°C) ±9°F|
|Outer Dimensions||19.7 x 15.8 x 9.4 Inches
(500 x 402 x 239 mm)
|Inner Dimensions*||14.2 x 14.2 x 5.0 Inches
(362 x 362 x 127 mm)
|Equipment Plate Dimensions||13.7 x 17.9 In. (348 x 455 mm)|
|Weight||16.3 lbs. (7.4 kg)|
|Ratings||NEMA Type 3R, 3RX / IP24|
|*Interior dimensions represent space available for equipment. See drawing for additional details.|
NEMA Ratings and IP Equivalency Chart