Altelix PoE Powered Fan Cooled Weatherproof Enclosure for Amazon eero® PoE 6 Wi-Fi 6 Access Point

The Altelix Vented Amazon eero® PoE 6 Enclosure with DC Cooling Fan is a weatherproof enclosure designed to provide indoor or outdoor protection for the Amazon eero® PoE 6 Wi-Fi 6 access point. Using a single Ethernet cable to provide power and data, this enclosure can be installed in remote locations with no power outlets available. It features a gasketed door to protect from dust and ingress, reinforced hinges, dual latches and a tamper-proof locking screw with key to secure the enclosure.

Integral Gigabit PoE/PoE+ Repeater / Power Splitter
Featured in this enclosure is an integral Gigabit PoE repeater/power splitter mounted to the equipment mounting plate. This Gigabit PoE splitter is used to power the thermostat controlled DC cooling fan as well as providing data+power to the Amazon eero® PoE 6 Wi-Fi 6 access point and one additional PoE enabled device. The PoE splitter is compatible with IEEE 802.3af/at standards and features 10/100/1000Mbps data speeds.

PoE Powered Cooling Fan
The NP17VMFE1-EER5 features dual 3" vents and a thermostat controlled PoE powered DC cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). Rain shrouds on the front door keep rain water from entering the enclosure. 

Easy Setup
The equipment mounting plate of the NP17VMFE1-EER5 is pre-drilled to except the wall mounting bracket that is included with the Amazon eero® PoE 6. Simply attach the wall mounting bracket to the plate and then install the access point. Once the PoE 6 is securely mounted inside the enclosure, special cable glands on the enclosure will allow pre-terminated Ethernet cables to be connected to the access point.

RF Transparent Design
The non-metallic design of the enclosure and equipment mounting plate is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

PC+ABS Polycarbonate / ABS Blend for Extreme Durability
This enclosure are molded out of UV resistant PC+ABS, a high tech thermoplastic blend of polycarbonate and ABS which combines the best qualities of both into a single material. PC+ABS enclosures are superior to ABS enclosures because they maintain high toughness, durability and dimensional stability even at extreme cold and hot temperatures.

Cable Gland 
This enclosure features a specially designed cable gland which will allow a pre-terminated Ethernet cable to be fed into the enclosure.

Mounting
The enclosure can be wall mounted using the included wall anchors. An optional pole mount kit is also available for installation on poles up to 8 inches in diameter.

Additional Enclosures for Amazon eero® Wireless Equipment
In addition to this enclosure, Altelix has enclosures for a wide range of Amazon eero® wireless access points and extenders. Click Here to view all available models.

eero® is a trademark or registered trademark of Amazon Technologies, Inc.

Technical Specifications

Material	PC+ABS Polycarbonate / ABS Blend
Available Colors	Gray, Black, Light Ivory, OD Green
Cooling Fan Turn-On Temperature	100°F (38°C) ±6°F
Cooling Fan Turn-Off Temperature	79°F (26°C) ±9°F
PoE Voltage	44-57 VDC
PoE Input Power	30W Max.
PoE Output Power	24W Max., Average 8W Per Port
Data Speed	10/100/1000 Mbps
PoE Protocol	IEEE 802.3at (30W), IEEE 802.3af (15.4W)
PoE Pinouts	Pins 1/2 (-) Pins 3/3 (+) Pins 4/5 (+) Pins 7/8 (-)
Outer Dimensions	16.5 x 13.7 x 6.7 Inches (420 x 348 x 167 mm)
Inner Dimensions	11.5 x 9.0 x 3.2 Inches (292 x 229 x 81 mm)
Mounting Plate Material	0.25 in (6.4 mm) PVC
Mounting Plate Dimensions	14.9 x 11.2 in. (378 x 285 mm)
Weight	5.0 lbs. (2.2 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Compatible Amazon eero® Model	eero® PoE 6 - Model #T010001

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.