Altelix Weatherproof Vented WiFi Enclosure for Amazon eero® 6 and eero® 6 Extender with Cooling Fan, 120VAC Outlet and Power Cord

New and Improved!
Altelix is excited to offer the newly redesigned NP14 series enclosures. Some of the new features include:

• Dual stainless steel latches
• Multiple mounting options - (4) external mounting feet and internal mounting points
• Deeper enclosure base
• Increased number of multiple sized knock-out holes provided on bottom of enclosure

The Altelix NP14VFA1C-EER3 is a vented fan cooled weatherproof enclosure designed to provide added security, vandalism and protection from harsh environments, while allowing ventilation for the Amazon eero® 6 router and eero® 6 Extender. It features two 3" inch air vents with rain shields and a thermostat controlled cooling fan.

Install Your Amazon eero® 6 Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual stainless steel latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.

Amazon eero® 6 and eero® 6 Extender Mount
The NP14VFA1C-EER3 features a mounting cradle specifically designed for both the Amazon eero® 6 router and eero® 6 Extender. Installation is easy, simply slide the eero® 6 into the mounting cradle. For extra security and installations subject to vibrations, an optional hook and loop strap is provided to secure the eero® 6 within the mounting cradle. The mounting cradle is designed so that it will not interfere with any of the ports on the eero® 6 such as power and Ethernet.

Cooling Fan Ventilation
The NP14VFA1C-EER3 features dual 3" vents and a thermostat controlled cooling fan. The low noise, high airflow fan helps maintain lower internal temperatures. The fan turns on when the internal temperature reaches 100°F (38°C) and turns off when it drops to 79°F (26°C). The fan is wired internally so it does not require the use of the AC outlets leaving them available for internal equipment use. Rain shrouds on the front door keep rain water from entering the enclosure.

Plug and Play Setup
The NP14VFA1C-EER3 enclosure provides easy plug-n-play installation. Once the eero® 6 is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland and cable grommets on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.

RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Multiple Mounting Options
This enclosure features (4) external mounting feet which can be used for wall mounting or with our optional pole mounting kit. Mounting points are also provided inside the enclosure. These can be easily drilled out and used for applications requiring a more secure installation.

Additional Products Available for Amazon eero®
Altelix has a full line of enclosures and mounts designed for use with Amazon eero® wireless products including the eero® mesh router, eero® Pro, eero® Pro 6E, eero® 6 and eero® 6 Extender. Click Here to view all available products.

eero® is a trademark or registered trademark of Amazon Technologies, Inc.

Technical Specifications

Material	Polycarbonate + ABS
Color	Gray
Voltage	120VAC
Max Load	10A @ 120VAC
Cooling Fan Turn-On Temperature	100°F (38°C) ±6°F
Cooling Fan Turn-Off Temperature	79°F (26°C) ±9°F
Outer Dimensions (Height x Width x Depth)	14.2 x 11.6 x 8.2 Inches (361 x 293 x 208 mm)
Inner Dimensions (Height x Width x Depth)	9.5 x 8.7 x 4.3 inches (241 x 220 x 109 mm)
Mounting Plate Material	0.40 In. (10 mm) PVC
Weight	6.4 lbs. (2.9 kg)
Power Cord Length	5 Feet (1.5m)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Industry Certifications	CE
Compatible eero® Model	eero® 6 (Model N010011) eero® 6 Extender (Model Q010011)

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.