Altelix 12x9x7 Vented PC+ABS RF Transparent Outdoor WiFi Enclosure with No-Drill PVC Equipment Mounting Plate

Vented Weatherproof Polycarbonate + ABS Construction For Extreme Durability

The Altelix NP120907VM features two 2¼" inch air vents covered by rain shields, with cleanable screens. It is ideal for protecting small devices from harsh environments and tampering, while allowing ventilation for installed equipment or batteries. It features an extra deep lid providing additional depth.

Construction and Features
This enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24. This enclosure can be easily drilled and modified by the installer to suit unique site requirements.

No-Drill Non-Metallic Equipment Plate
This configuration consists of the PC+ABS enclosure with hinged lid and a 1/4" thick non-metallic PVC plate for mounting and securing equipment. Due to the "No-Drill" design of this PVC plate, mounting radios and other equipment can be done simply by using self-tapping screws.

RF Transparent Design
The NP120907VM is ideal for WiFi applications. The non-metallic design of both the enclosure and equipment mounting plate will not interfere with the radio's operation. The size of this enclosure will fit a wide range of popular wireless points on the market.

Complete with Cable Grommets and Glands and Wire Management Straps
This enclosure includes 2 weatherproof cable grommets. Simply punch out the seal and run your cables. For convenience, the included accessory kit contains additional cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Pole Mount Available
A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.

Technical Specifications

Material	Polycarbonate + ABS
Available Colors	Gray, Light Ivory, OD Green
Outer Dimensions (Height x Width x Depth)	13.1 x 10.2 x 8.0 Inches (334 x 259 x 204 mm)
Inner Dimensions* (Height x Width x Depth)	9.4 x 7.5 x 5.7 Inches (239 x 190 x 145 mm)
Mounting Plate Material	0.25 in. (6.4 mm) PVC
Weight	3.0 lbs. (1.4 kg)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0

*Interior dimensions represent maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.