Altelix Weatherproof Vented WiFi Enclosure for Amazon eero® 6 and eero® 6 Extender with 120VAC Outlet and Power Cord

Protect Your Amazon eero® 6 and eero® 6 Extender

The Altelix NP12VA1C-EER3 is a vented weatherproof enclosure designed to provide added security, vandalism and protection from harsh environments, while allowing ventilation for the Amazon eero® 6 WiFi router and Amazon eero® 6 Extender. It features two 2¼" inch air vents with rain shields and screens.

Install Your Amazon eero® 6 Securely
This sleek enclosure is molded out of UV resistant Polycarbonate + ABS, an industrial grade plastic with greater strength and durability than standard ABS. It features a gasketed hinged door with dual latches, a stainless steel security screw and provision for padlock. Integrated mounting feet simplify installation. It meets or exceeds NEMA 3R, 3RX and IP24.

Amazon eero® 6 and eero® 6 Extender Mount
The NP12VA1C-EER3 features a mounting cradle specifically designed for both the Amazon eero® 6 WiFi Router and Amazon eero® 6 Extender. Installation is easy, simply slide the eero® 6 into the mounting cradle. For extra security and installations subject to vibrations, an optional hook and loop strap is provided to secure the eero® 6 within the mounting cradle. The mounting cradle is designed so that it will not interfere with any of the ports on the eero® 6 such as power and Ethernet.

Plug and Play Setup
The NP12VA1C-EER3 enclosure provides easy plug-n-play installation. Once the eero® 6 is securely mounted inside the enclosure, connect its power supply to the internal 120VAC power outlet. A cable gland and cable grommets on the enclosure allow cables to be connected to the device. Simply plug the enclosure's 5 foot power cord into a power outlet and you are up and running.

RF Transparent Design
The non-metallic design of the enclosure and bracket is RF transparent and will not interfere with the WiFi signal range or coverage pattern.

Complete with Cable Grommets and Glands and Wire Management Straps
For convenience, the included accessory kit contains cable grommets and glands, wall anchors, zip ties, hook-and-loop wire management straps, door locking key and more.

Mounting
The external mounting feet on the NP12VA1C-EER3 allows it to be easily wall mounted with the included hardware. For added security, mounting the enclosure using the internal mount feet can prevent the enclosure from being removed when locked. A pole mounting kit is also available for this enclosure. The NMKG-150-08 attaches to the rear of the enclosure and allows it to be mounted to poles and fence posts up to 9.5 inches in diameter.

Additional Products Available for Amazon eero®
Altelix has a full line of enclosures and mounts designed for use with Amazon eero® wireless products including the eero® mesh router, eero® Pro, eero® Pro 6E, eero® 6 and eero® 6 Extender. Click Here to view all available products.

eero® is a trademark or registered trademark of Amazon Technologies, Inc.

Technical Specifications

Material	Polycarbonate + ABS
Available Colors	Gray, Light Ivory, OD Green
Voltage	120VAC
Max Load	10A @ 120VAC
Outer Dimensions (Height x Width x Depth)	13.1 x 10.2 x 5.9 Inches (334 x 259 x 151 mm)
Inner Dimensions* (Height x Width x Depth)	8.5 x 7.5 x 3.7 Inches (216 x 190 x 95 mm)
Mounting Plate Material	0.25 in. (6.4mm) PVC
Weight	3.7 lbs. (1.7 kg)
Power Cord Length	5 Feet (1.5m)
Ratings	NEMA Type 3R, 3RX / IP24
Flame Rating	Meets UL94-V0
Compatible eero® Models	eero® 6 (Model N010011) eero® 6 Extender (Model Q010011)

*Interior dimensions represent maximum space available for equipment.

NEMA Ratings and IP Equivalency Chart This chart provides the different NEMA ratings and their definitions as well as the IP equivalents and definitions.